A Samsung washer not draining is a common problem. It can be very frustrating. If your washer is filled with water and won’t let it out, don’t panic! There are several things you can try at home first. You may not need to call a repair person right away. This guide will look at typical reasons why your Samsung washer won’t drain properly. It will also give you easy steps on how to make your Samsung washer drain again.
Common Causes of Drainage Problems
When your Samsung washer won’t drain, it might happen for different reasons. The most common reason is usually a blockage in the drain hose or the drain filter. Over time, laundry lint, small fabric pieces, and even little objects can pile up and block the water flow. Another issue could be a kink in the drain hose, preventing water from moving through.
Samsung Washing Machine Not Draining: Step-by-Step Troubleshooting Guide
This guide will help you on how to get Samsung washer to drain effectively. It will take you from easy solutions to more detailed checks. Always make sure to unplug your washer before you begin any repairs. Your safety is very important.
Before you start, check your washer’s user manual for specific instructions and safety tips. Now, let’s get your Samsung washer to drain the right way again!
Checking and Cleaning the Drain Filter
If your Samsung front load washer is not draining properly, the first thing you should do is check and clean the drain filter. This task is simple and can often fix drainage issues.
The drain filter is usually at the bottom front of your washer, behind a small access panel. Make sure to put towels on the floor to catch any spills. Open the panel and find the drain filter, then carefully unscrew it to take it out.
After you pull the filter out, rinse it well under running water to remove any debris. You may be surprised by what you find! Once it’s clean, put the filter back in securely, close the access panel, and run a test cycle to see if the problem is fixed.
Inspecting the Drain Hose for Clogs or Kinks
If your Samsung washing machine is not draining well, even after you cleaned the drain filter, check the drain hose next. A blocked or bent drain hose can stop the water from draining properly.
Look closely at the whole drain hose. Start from the back of the washing machine and go to where it connects to the drainpipe or standpipe. Check for any bends or kinks that could be blocking the water flow. If you find any kinks, try to straighten them out.
It’s a good idea to take the drain hose off completely and check for clogs. You can use a straightened coat hanger or a plumbing snake to remove anything stuck inside. After you clear out any blockages, put the drain hose back on tightly. Then run a test cycle to see if the draining problem is fixed.
Checking the drain hose for clogs or kinks 
A well-installed and well-maintained drain hose is very important for good drainage in your Samsung washing machine. Even a small problem with the drain hose, like a bad connection or being too high, can cause drainage issues.
Make sure the drain hose is securely placed into the drainpipe or standpipe to avoid leaks. Also, check that the height of the drain hose is correct. It should be at least 30 inches high but no more than 96 inches high, as Samsung suggests.
If the drain hose is too high or too low, it can affect how well your washer drains. By fixing these issues, your Samsung washing machine can keep draining properly without any problems.
Cleaning the debris filter
Your Samsung washer has a debris filter in addition to the drain filter. This filter catches larger items like coins and buttons. Cleaning the debris filter often helps stop clogs and keeps your washing machine running well. The place of the debris filter can change based on your Samsung washer model. It’s a good idea to check your user manual for exact details.
On many models, you can find the debris filter at the back near the bottom. Before you check the filter, turn off the water supply to the washer to avoid any leaks. Once the water is off, grab a small bucket or container to catch any water that might spill out when you open the filter.
After you clean the debris, carefully put the filter cap back on and make sure it is tight to stop leaks. Then, turn the water supply back on and check for leaks around the filter. Cleaning the debris filter regularly can help your washing machine last longer and avoid drainage issues.
Testing the drain pump for malfunction
If you have looked at the drain filter, drain hose, and debris filter, but your Samsung washing machine is still not draining, the problem might be with the drain pump. The drain pump is the part that pushes out the water during the drain cycle. If it has issues, it can stop the washer from draining properly.
To test the drain pump, you usually need to get to it from the back or bottom of the machine. Check your user manual to find its exact location in your model. Once you find the drain pump, look closely for any damage or blockages.
You can also try to turn the pump impeller by hand to see if it moves easily. If the impeller is stuck or if you hear strange noises from the pump, it might be broken and needs a new one. Replacing the drain pump is a tricky job, so it is best to get help from a qualified technician for this repair.
Inspecting the door latch and sensor
In Samsung front load washers, problems with draining, such as the Samsung front load washer not draining, can happen due to a broken door latch or sensor. The washer needs the door latch and sensor to keep the door shut tight before it starts to drain water. If the sensor isn’t working right, it may wrongly signal that the door is open, which stops the washer from draining.
You should look closely at the door latch assembly for any damage. Check if the latch hook is not working as it should. Also, look for any dirt or objects that might be blocking the latch. If you see any damage, you will need to replace the door latch assembly.
The door sensor is a small electrical part near the latch. You can check if it is working with a multimeter. If the sensor doesn’t work properly, it will have to be replaced. If you don’t feel safe dealing with electrical parts, it’s best to call Samsung Appliance Repair for help.
Resetting the washer’s control board
Sometimes, resetting your Samsung washer’s control board can fix drainage problems. This is especially true if the issues come from electronic glitches. Resetting the control board can clear any temporary faults that might affect the washer’s drain cycle.
To reset the control board, first, unplug your Samsung washer from the power. Leave it unplugged for a few minutes. While it’s unplugged, press and hold the power button for about 30 seconds. This action will help discharge any leftover electricity from the control board.
After a few minutes, plug the washer back in and turn it on. Then, run a test cycle to see if resetting the control board fixed the drainage issue. Remember, resetting the control board can help with electronic glitches, but it might not solve all drainage problems.
Conclusion
If your Samsung washer not draining properly, you can try some simple steps to fix it. First, check the drain filter. Then, look at the drain hose and test the drain pump. These actions might help you solve the problem. If the issue doesn’t go away, think about getting help from us at Samsung Appliance Repair. This will make sure your washer works well. For more ways to care for your Samsung washer or to solve other appliance problems, visit our blog on Samsung washer stops mid cycle for detailed help.
Frequently Asked Questions
What should I do if my Samsung washer is not draining water at all?
If your Samsung washer won’t drain, first unplug it for safety. Then, check the drain hose for any twists or blockages. Also, clean the drain filter. If these steps do not solve the problem, it’s a good idea to reach out to Samsung support or a skilled technician.
What are some common reasons why a Samsung washer won’t drain properly?
Common reasons why a Samsung washing machine may not drain properly include:
- A clogged drain filter or hose
- A kinked drain hose
- A broken drain pump
- Problems with the door latch or sensor in front-load models
Are there any maintenance tips to prevent drainage problems in my Samsung washer?
To stop drainage issues in your Samsung washer, clean the drain filter and debris filter often. Don’t overload the washer. Also, make sure the drain hose is installed properly and is not bent or blocked.
When should I consider seeking professional help for a draining issue with my Samsung washer?
If your Samsung front load washer is not draining, even after checking the filters and hose, you should call a professional. Problems with the drain pump or electrical issues should be fixed by trained technicians.